Is an Engineer Stamp Required for My Deck Project in Georgia?

Georgia's counties — Fulton, Gwinnett, Cobb, Chatham — review structural drawings for decks under the Georgia State Minimum Standard Building Code, and the PE seal is the standard requirement for non-prescriptive decks. The seal must show the engineer's name, Georgia PE number, and date, and the engineer must be in responsible charge of the engineering. Elevated decks, coastal decks, and decks with roofs are treated the same at the structural level. Owner-builders don't escape the requirement: the building department asks for the seal regardless of who drafted the plans.

The engineer reviews the deck plan and elevations, designs the footings below the frost line — Georgia red clay and coastal sands get extra attention — sizes beams, joists, and posts, and checks the ledger connection and the lateral system for hurricane wind, coastal flood, and seismic demand per the Georgia building code. Coastal decks get extra scrutiny for wind and erosion. Hot tubs add concentrated loads that prescriptive tables don't cover. Bring the site survey, the geotechnical report, and the deck plans. Wind design is the item most deck plans miss.

Use this checklist before engaging an engineer for your deck: • Engineer of record holds an active Georgia PE license, verifiable on the state roster • Dimensioned deck plan and elevations ready for structural review • Site survey showing setbacks, easements, flood zone, and existing structures • Hurricane wind design verified for the exposure • Frost-depth compliance verified for all footings • Ledger connection to the house detailed and verified • Engineer confirms they'll respond to plan-check corrections on sealed sheets • Seal shows name, Georgia PE number, and date on every sealed sheet