Is an Engineer Stamp Required for My Deck Project in Arkansas?

Arkansas's cities — Little Rock, Fayetteville, Fort Smith, Jonesboro — review structural drawings for decks under the state-adopted building code, and the PE seal is the standard requirement for non-prescriptive decks. The seal must show the engineer's name, Arkansas PE number, and date, and the engineer must be in responsible charge of the engineering. Elevated decks, hillside decks, and decks with roofs are treated the same at the structural level. Owner-builders don't escape the requirement: the building department asks for the seal regardless of who drafted the plans.

The engineer reviews the deck plan and elevations, designs the footings for Arkansas's expansive clays and the Delta's soft soils — the Ozark hills get slope scrutiny too — sizes beams, joists, and posts, and checks the ledger connection and the lateral system for wind and seismic demand per the state-adopted code. Northeast Arkansas seismic gets extra scrutiny near the New Madrid zone. Hot tubs add concentrated loads that prescriptive tables don't cover. Bring the site survey, the geotechnical report, and the deck plans. Seismic design is the item most deck plans miss.

Use this checklist before engaging an engineer for your deck: • Engineer of record holds an active Arkansas PE license, verifiable on the state roster • Dimensioned deck plan and elevations ready for structural review • Site survey showing setbacks, easements, slope, and existing structures • Seismic design verified for the site zone • Expansive-clay footing design verified • Ledger connection to the house detailed and verified • Engineer confirms they'll respond to plan-check corrections on sealed sheets • Seal shows name, Arkansas PE number, and date on every sealed sheet