Is an Engineer Required for My Home Addition Project in Utah?

Utah cities — Salt Lake City, Provo, Ogden, St. George — review addition plans under their adopted codes, and the PE seal is the standard requirement for anything structural. The seal must show the engineer's name, Utah PE number, and date, with the engineer in responsible charge. Additions that expand the footprint, add a second story, or open up load-bearing walls are treated as structural work everywhere in Utah. Owner-builders don't escape the requirement: the building department asks for the seal regardless of who drew the plans, and the engineer must verify the existing home's framing and foundation can take the new loads.

The engineer reviews the as-built plans and the addition design, designs the foundation for seismic forces, with attention to collapsible and expansive soils, and checks seismic lateral design tied into the existing home's shear walls. The tie-in to the existing house gets special attention — ledger and diaphragm connections, differential settlement between old and new foundations, and load path continuity. Bring the site survey, the geotechnical report, and dimensioned as-builts. The Wasatch Front's seismic risk plus problem soils drive engineering for most Utah additions.

Use this checklist before engaging an engineer for your addition: • Engineer of record holds an active Utah PE license, verifiable on the state roster • Dimensioned as-built plans of the existing home, including framing • Site survey showing setbacks, easements, and existing structures • Geotechnical report addressing seismic risk and problem soils for the lot • New foundation designed for seismic risk and problem soils — not just copied from the original house • Connection between the addition and the existing house fully detailed • Existing structure verified for the new loads before construction • Engineer confirms they'll respond to plan-check corrections on sealed sheets