Do I Need an Engineer for a Garage Conversion in New Mexico?

New Mexico cities — Albuquerque, Las Cruces, Rio Rancho, Santa Fe — treat a garage-to-living conversion as a change of occupancy, and the PE seal is the standard requirement for the structural sheets. The seal must show the engineer's name, New Mexico PE number, and date, with the engineer in responsible charge. Conversions that remove the overhead door, alter the fire separation, or change the slab's use are treated as structural work everywhere in New Mexico. Owner-builders don't escape the requirement: the building department asks for the seal regardless of who drew the plans, and the engineer must verify the garage slab and framing can serve as living space.

The engineer evaluates the garage slab for living-space use, designs the infill wall and beam for collapsible and expansive soils under the garage slab, and checks wind and localized seismic design for the infill wall. Fire separation gets its own review — rated drywall on the garage side, protected openings, sealed duct and pipe penetrations, and no return air shared with the dwelling. Bring as-built dimensions, photos of the slab and framing, and any original plans. New Mexico's collapsible soils require wetting-mitigation design before a garage slab becomes a living floor.

Use this checklist before engaging an engineer for your conversion: • Engineer of record holds an active New Mexico PE license, verifiable on the state roster • Garage slab evaluated for living-space use — thickness, cracking, and settlement • Geotechnical input addressing collapsible soils and wind for the lot where it applies • Infill wall and beam designed where the overhead door was removed • Fire separation between garage and dwelling fully detailed (rated drywall, protected openings) • Ceiling height and egress verified against habitable-space requirements • Electrical and plumbing upgrades sized for the new living space • Engineer confirms they'll respond to plan-check corrections on sealed sheets